Irrigation Products
You can find information here on most of the irrigation
products we use:
Controllers
Valves
Sprayheads
Micro-Irrigation
Other Hardware
Indoor & Outdoor Controllers (Timers)
Irritrol Slim Dial
Download
PDF Manual
|
· Two independent
programs offer concurrent operation capability
· Automatic, semi-automatic and manual operation
· Guided Programming™
· Simple nine-position programming dial and large, self-prompting LCD
· Master valve/pump start circuit
· Station run times: 1 minute to 4 hours in 1 minute increments
· Start times: 2 per program for up to 4 total
· Watering schedule: 365-day calendar for days of the week or odd/even
programming |
Irritrol KwikDial
|
· Three independent
programs offer concurrent operations capability and start time
stacking
· Water budget feature globally scales all station run times (0-200%)
within a program
· Flexible watering day schedules including Exclude Day(s) option
· Programmable "Rain Off" up to 7 days
· Dial and four push buttons for ease of use
· Automatic, semi-automatic and manual operation
· Self-diagnostic circuit breaker identifies and overides short-circuits
· Non-volatile memory maintains clock and program through power outages
up to 24 hours
· Rain sensor hook up with sensor bypass switch
· Remote ready
· Station run times: 1 minute to 4 hours in 1 minute increments
· Start times: 9 total start times, 3 per program
· Watering schedule:7-day calendar, odd/even day, interval option of 1-30
days, or excluded days |
Irritrol Lawn Master
Download
PDF Manual
|
· Three independent
programs offer concurrent operations capability and start time
stacking
· Water budget feature globally scales all station run times (10-200%)
within a program
· Programmable "Rain Off" up to 7 days
· Easy to use, 10-position dial
· Automatic, semi-automatic and timed-manual operation
· Self-diagnostic circuit breaker identifies and overides short-circuits
· Non-volatile memory holds program through power failures of any duration
· Rain sensor hook up with sensor overide setting
· Station run times: 1 minute to 10 hours in 1 minute increments
· Start times: 9 total start times, 3 per program
· Watering schedule:7-day calendar, odd/even day or interval option of
1-30 days |
Irritrol Total Control
Download
PDF Manual
|
· Four independent
programs offer concurrent operation capability
· User friendly, 10-position programming dial and large, easy-to-read
display
· Excluded day option, when used with the odd/even day option, allows
selection of specific day(s) not to water
· Programmable master valve On/Off per program
· Programmable "Rain Off" up to seven days
· Automatic, semi-automatic, manual and timed-manual operations
· Modular design allows easy removal of control module with out disturbing
wiring
· Full-size terminal boards permit easy upgrades
· Self-diagnostic circuit breaker identifies and overrides short-circuits
· Optimum two-stage primary and secondary surge protection
· Non-volatile memory holds program through power failures of any duration
· Sensor hook up with sensor override switch on terminal board
· Station run times: 1 minute to 10 hours in 1 minute increments
· Start times: 16 total starts assignable to any program, start time stacking
· Watering schedule:7-day calendar, odd/even day or interval option of
1-30 days
· Water budgeting: 10-200% per program in 10% increments |
DIG 510
Battery Operated Controller
Download
PDF Manual
|
· Powered
by two 9 volt alkaline batteries, battery life up to two years
· Four button operation with an integrated liquid crystal display (LCD)
· Four start times per day
· Watering durations in 1 minute increments from 1 minute to 12 hours
· 7 day programming schedule or intervals from 1 to 30 days
· Manual irrigation cycle via the controller
· Completely waterproof
· Internal manual bleed
· Manual shut-off
· Irrigation suspension override (rain-mode)
· Automatic, semi-automatic and manual operation
· 24" solenoid wire with water proof connection to the controller
· Program stored up to 20 seconds during battery change |
DIG HB9001
Battery Operated Hose Bibb Mount Controller |
• 3/4” female garden
hose thread inlet and male hose thread outlet.
• 6 buttons with easy to read integrated LCD display.
• Watering duration from 1 minute to 12 hours in 1 minute
increments.
• 7 day calendar schedule.
• Up to 4 start times per day.
• Automatic and one-button manual operation.
• Irrigation suspension override (rain mode).
• Weather reesistant housing.
• Quiet, durable electric motor.
• Operating Pressure: 10-140 psi
• Flow Range: up to 5.2 gpm @ 30 psi |
Go to Top Go
to Bottom
Automatic & Manual Zone Control Valves
Irritrol 205
1" Electric Valve
|
· Nylon-reinforced Buna-N
diaphragm provides leak-proof seal
· Buna-N valve seat seal
· Removable manual internal bleed
· Debris-tolerant design allows dirty water use
· High-flow, low-friction-loss design
· Removable flow control handle for flow adjustment and manual shutoff
· Heavy-duty, corrosion- and UV-resistant PVC and stainless steel construction
· High-strength ribbed bonnet
· Encapsulated injection-molded solenoid
· Debris-tolerant captive plunger
· Flow range: 5-30 GPM
· Pressure range: 10-150 psi |
Irritrol 2500
1" Electric Valve |
Rugged, double-beaded SANTOPRENE diaphragm
provides leak-proof seal
· Buna-N valve seat seal
· Manual internal bleed, manual external bleed (flush mode)
· Full stainless steel metering system
· Debris-tolerant design suitable for wells and dirty water applications
· High-flow, low-friction-loss design
· Optional ergonomic flow control allows precise flow adjustment and manual
shutoff
· Self-aligning bonnet permits fast and easy servicing
· Heavy-duty, corrosion- and UV-resistant PVC and stainless steel construction
· Encapsulated injection-molded solenoid, captive plunger
· Flow range: 5-25 GPM
· Pressure range: 10-150 psi |
Irritrol 700 UltraFlow
Electric Valve
|
· Manual internal
bleed
· Self-cleaning, 150-mesh, stainless steel filter screen on 1", 1.5",
and 2" models
· Straight-through flow path provides low pressure loss
· Slow-closing design prevents water hammer
· Flow control allows precise flow adjustment and manual shutoff
· Compact, low-profile design
· Glass-reinforced nylon body and bonnet construction with stainless steel
spring and hardware
· Rugged, nylon-reinforced Buna-N diaphragm
· Captive plunger solenoid
· Optional Pressure Regulation module (OmniReg™)
· 3/4", 1", 1.5" and 2" models
· Flow range: .10-180 GPM
· Pressure range: 10-150 psi |
Irritrol 217
Commercial Electric Valve
|
· Side and bottom
inlets
· Manual internal and external bleed
· Slow-closing design reduces water hammer
· Optional flow control allows precise flow adjustment and manual shutoff
· Heavy-duty, corrosion- and UV-resistant PVC construction with stainless
steel spring and hardware
· Double-beaded diaphragm provides leak-proof seal
· Threaded inlet plug O-ring seal prevents leaks
· Encapsulated solenoid, captive plunger feature eliminates loose parts
in solenoid
· Easily serviced without removal from the system
· 1.5" and 2" models
· Flow range: 5-120 GPM
· Pressure range: 20-150 psi |
Irritrol 2713
Anti-Siphon Valve
|
· Built-in atmospheric
vacuum breaker for backflow protection
· Manual external bleed
· Removable flow control handle allows precise flow adjustment and manual
shutoff
· Gravity-type anti-siphon poppet
· Heavy-duty, corrosion- and UV-resistant PVC construction
· Full stainless steel metering system
· Encapsulated solenoid
· Electric H-body atmospheric vacuum breaker
· Rugged, nylon-reinforced Buna-N diaphragm
· 3/4" and 1" models
· Flow range: 5-25 GPM
· Pressure range: 10-150 psi |
Irritrol 2706
Manual Anti-Siphon Valve
|
· Manual on/off via
easy grip top handle
· Built-in atmospheric vacuum breaker for backflow protection
· Gravity-type anti-siphon poppet
· Heavy-duty, corrosion- and UV-resistant PVC construction
· Full stainless steel metering system
· Rugged, nylon-reinforced Buna-N diaphragm
· Convertible to electric operation
· 3/4" and 1" models
· Flow range: 5-25 GPM
· Pressure range: 10-150 psi |
| |
|
Go to Top Go
to Bottom
Popup Fixed-Arc & Rotating Sprayheads
Irritrol SL Series
Popup Spray
|
· Compact slimline body
design (exposed diameter: 1 1/4")
· Adaptable to microspray use
· Ratcheting riser permits easy arc adjustment in the field
· One-piece molded body adds durability
· Pressure activated seal reduces flow-by and cleans debris from stem
· Heavy-duty, stainless steel retract spring ensures positive pop-down
· Radius reduction screw permits up to a 25% in-field reduction
· Recommended working pressure: 20-70 psi
· Precipitation rate: 1.34-2.15 inches per hour
· Spacing: 6'-15'
· Flow-by: 0 at 10 psi or greater; .5 GPM otherwise |
Irritrol HS Series
Popup Spray
|
· One-piece molded
body adds durability
· Heavy-duty, stainless steel retract spring ensures positive pop-down
· Pressure activated seal cleans debris from stem
· Ratcheting riser permits easy arc adjustment in the field
· Radius reduction screw permits up to a 25% in-field reduction
· Recommended working pressure: 20-40 psi
· Precipitation rate: 1.34-2.15 inches per hour
· Spacing: 6'-15'
· Flow-by: 0 at 8 psi or greater; .5 GPM otherwise |
K-Rain MiniPro
Popup Gear-Driven Mini Rotor
|
· 25'-48' spacing
· Water-lubricated, gear-driven design provides dependable, steady operation
· Power pause offers exceptional performance in the wind
· Slip clutch prevents damage to internal gear drive components when torqued
out of pre-set arc
· Universal stator controls water flow over the turbine and supplies nozzle
as required regardless of nozzle used
· Six interchangeable, easily removed nozzles offer several balanced precipitation
schemes
· Radius adjustment screw allows up to 25% reduction on each nozzle
· 4-3/4" pop-up ensures interference-free operation
· Stainless steel retract spring provides positive pop-down
· Large mesh screen prevents clogging in dirty water applications
· Serviceable seal, seal retainer, cap, spring, screen and riser assembly
· Constructed of heavy-duty ABS Cycolac plastic
· Operating pressure range: 25-75 psi
· Flow rate: 1.0-5.5 GPM (low flow nozzle set) 1.4-8.0 GPM (medium flow
nozzle set)
· Precipitation rate: 0.22-0.62 inches per hour
· Arc adjustment: 20-360 degrees
· Nozzle trajectory: 24 degrees
|
Irritrol CR500
Popup Gear-Driven Rotor
|
· Top visual arc
indicator for simple adjustment
· Nine interchangeable standard nozzles
· Continuous rotation provides even coverage when set at 360°
· Automatic return to preset arc if nozzle turret is tampered with
· Pre-installed check valve eliminates low-head drainage
· Standard integrated rubber cover
· Stainless steel radius adjustment screw allows up to 25% radius adjustment
· 5" pop-up height
· Heavy duty retract spring provides positive pop-down
· Pressure activated seal
· Robust trip mechanism
· 28'-50' spacing
· Operating pressure range: 30-70 psi
· Flow rate: 0.5-10 GPM
· Precipitation rate: 0.3-0.5 inches per hour
· Arc adjustment: 40-360 degrees
· Nozzle trajectory: 26 degrees |
| |
|
Go to Top Go
to Bottom
Micro & Drip Irrigation
  
Antelco WingJet Micro-Spray
|
· Application: shrub,
annual and perennial plantings; beds of varying widths
· Available in 4 flow rates and 1/4, 1/2 or full circle spray patterns
· Water delivery: Blue - 9.5 GPH, Green - 19 GPH, Black - 24 GPH, Red
- 27 GPH
· Coverage area: 4-9' radius
· Installation: Threads into 1/4" rigid riser or adapts onto 1/2" riser
or popup spray
|
Antelco Spectrum Micro-Spray
|
· Application: shrub
and perennial plantings where a low spray is required; beds
of varying widths; pots, planters, and hanging baskets.
· As flow is fully adjustable, can be used as a bubbler or a spray.
· Water delivery: 0-20 GPH
· Coverage area: 0-5' radius
· Installation: Built-in stake model attaches directly to 1/4" tubing,
regular model threads onto 1/2" riser. |
Antelco AgriDrip Dripper
|
· Application: used
in shrub plantings, container gardens, hanging baskets, etc.
to provide slow, gentle root watering for individual plants.
· Water delivery: 0.5-2.0 GPH
· Coverage area: Individual plants
· Installation: Attaches to 1/4" distribution tubing. |
Antelco Adjustable Bubbler
|
· Application: hanging baskets,
planters, window boxes, & rockeries where a controlled but
variable low-flow watering is required.
· Allows a single type of head to be used for pots of varying widths up
to approx. 18".
· Water delivery: 0-23 GPH
· Coverage area: Individual plants
· Installation: Built-in stake model attaches directly to 1/4" tubing,
regular model threads onto 1/2" riser. |
 
Agrifim Multiport Emitters
|
· Application: pressure
compensating manifold for even distribution of water to a number
of micro-sprays, drippers, emitterline, etc.
via 1/4" distribution tubing attached to outlet ports.
· Water delivery: 4, 6, 8 ports, 2-20 gph per port
· Installation: Mounts onto 1/2" riser
|
DripIn Emitterline
|
· Application: 1/4" or
1/2" soaker line for slim beds, hedges, dense annual/perennial
plantings, ground covers, vegetable garden rows.
· Water Delivery: 0.5-2.0 gph per built-in emitter, emitters spaced every
12"
· Coverage Area: Individual plants, rows
· Installation: Attaches to 1/4"or 1/2" insert or compression
pipe fittings.
|
| |
|
Go to Top Go
to Bottom
Backflow Preventers, Rain Sensors, Filters, Etc
Watts 007M1QT
Double Check Valve
Assembly
|
· Top entry - ease
of maintenance - only one cover
· Replaceable seats and seat discs
· Modular design concept which facilitates complete maintenance and assembly
by retaining the spring load.
· Compact design
· Cast bronze body construction - 1 2" - 2" (15-50mm)
· Fused epoxy coated cast iron body - 2 1 2" & 3" (65-80mm)
· Full port resilient seated bronze ball valve shut-offs with tee handles
· Top mounted ball valve test cocks
· Low pressure drop
· Supply pressure up to 175 PSI
· Water temperatures to 140ºF constant and 180ºF intermittent |
Watts 009QT
Reduced Pressure Zone
Backflow Assembly
|
· Single access cover
and modular check construction for ease of maintenance
· Top entry - all internals immediately accessible
· Captured springs for safe maintenance
· Internal relief valve for reduced installation clearances
· Replaceable seats for economical repair
· Bronze body construction for durability - 1 4" to 2" (8-50mm)
· Fused epoxy coated cast iron body - 2 1 2" and 3" (65-80mm)
· Ball valve test cocks - screwdriver slotted - 1 4" to 2" (8-50mm)
· Large body passages provides low pressure drop
· Compact, space saving design
· Supply pressure up to 175 psi (12 bars)
· Water temperature: 33°F - 180°F (-3°C to 75°C). |
Irritrol RS500
Rain Sensor
|
· Provides a simple,
but effective way to prevent your sprinklers from coming on
during or after rainfall.
· Simple click-stop settings accurately measure rainfall in quantities
of 1/8" to 1"
· Easily installed and maintenance-free
· Water-absorbing, hygroscopic disks are designed to absorb and release
water at the same rate as the average soil.
· Can be used to control booster pumps, single station controller/indexing
valve set-ups, hydraulic controllers.
· Height: 3.25 inches, Length: 6 inches
· Switch Rating: UL Listed-10.1 amps, 1/4 H.P. at 125/250 VAC
· Adjustment Ranges: Rainfall shutoff at 1/8", 1/4", 1/2",
3/4", or 1", ±1/16"
· Plastic parts made of Valox®, a UV stabilized engineering plastic
· Includes: 25 feet of 20 gauge two conductor wire and a short lead for "normally
open" wiring |
Irritrol RS1000
Wireless Rain Sensor
|
· Operates same as
above but without the wires
· Built-in 'Rain Off' and 'Low Battery' status indicators along with a
Smart Bypass Switch
· Mounting: 'Quick-Clip' gutter bracket, screw mount, pole mount with
adaptor
· Transmitting Range: 300 ft Range (LOS)
· Adjustment Ranges: Rainfall shutoff at 1/8", 1/4", 1/2",
3/4", or 1", ±1/16"
· Transmitter Battery Life: 5 years
· Battery Type: (2) CR2032 3V cells
· Receiver Power: 22-28 VAC/VDC, 100mA (from existing controller or optional
transformer)
· Relay Contacts Output: Normally open and normally closed - 3A@24VAC |
Amiad SuperFilter
|
· High flow 1" disc
filter
· Filter element consists of a stack of thin plastic discs grooved on
both sides, piled around a telescopic core
· Disc release for easy rinsing under running water
· Perforated screen and weavewire stainless steel filter elements also
available for the same housing
· Max Flow: 30 gpm, Max Pressure: 150 psi
· Disc Filter Area: 31 sq. in.
· Housing Construction Material: Polyacetal
· Housing seal: Nitril Rubber
· Grooved discs: Polyethylene
· Seals: Nitril Rubber
· Standard Filtration Degree: 130 micron
· Other Filtration Degrees Available: 25, 100, 250 micron |
Mazzei
Fertilizer Injector
|
· High efficiency,
Venturi-type, differential pressure injectors
· Operates over a wide range of pressures, require only a minimal pressure
differential
· Considerable cost savings versus other injection methods.
· Single unit construction-Trouble free operation with no moving parts
· No electrical connections needed
· Can run dry with no problems
· Molded of: Polypropylene; PVDF (KYNAR)
· Flow ranges of 1/2 GPM through 40 GPM |
| |
|
Go to Top
|
